FMApp Release Notes

Version 2.1.4 Mar 16 2012
- Added: Fine sweep at max peak
- Added: Skip subtract bias off value
- Added: Subtract system noise option

Version 2.1.1 Mar 14 2012
- Fixed: In FMR Sweep test, When trying to sweep external stress item, generated an error "RunExternalStress 
item in the wrong format".

Version 2.1.0 Feb 23 2012
- Added: Option to automatically add FMR and QPS Splitter to the hardware configuration

Version 2.0.3 Feb 20 2012
- Fixed: Did you save "Subtract baseline noise" setting

Version 2.0.2 Feb 06 2012
- Fixed: Errors if FMR not defined in the hardware configuration file

Version 2.0.0 Jan 30 2012
- Added: Compatilibity to ISI2010Lib and QPSSplitLib, operating through Quasi97 Hardware Options.

Version 1.3.1 May 16 2011
- Fixed: Error in Filter setup form: If subtract noise checked. Form loaded with error message.

Version 1.3.0 May 6 2011
- Added: Capability to change Amplitude units between db, nv, nv^2.

Version 1.2.7 Sep 2 2010
- Added: Max Frequency SW1 and SW2 results to the FMR Sweep Test.

Version 1.2.6 Jul 15 2010
- Fixed: The peak was not interpolated, which resulted in >50MHz digitization.
- Added: Programmable AC Gain parameter for QST tests

Version 1.2.5 Nov 19 2009
- Fixed: Field parameter in FMR Sweep test was not taken into account
- Fixed: In all tests, field polarity was not taken into account, which resulted in mismatch of the field in transfer curve and other quasi tests vs FMR tests.

Version 1.2.4 Oct 22 2009
- Fixed: RPLT Stability test showed an error "CopyRawData: Subscript out of range", when running in production and logging raw data, and number of cycles was more than 1

Version 1.2.3 Oct 8 2009
- Fixed: FMRSweep test, Min sw1 and Min sw2 reported the location of minimum amplitude, not frequency.

Version 1.2.2 Sep 18 2009
- Fixed: Abort function in RPLT Stability
- Fixed: Abort function in FMR Transfer test
- Added: Null Data Gaps in the FMR Angle Sweep Test

Version 1.2.1 Sep 8 2009
- Fixed: Did not plot results someimes if the test was aborted

Version 1.2.0 Sep 2 2009
- Added: Capacitance result for reference to all tests
- Added: Marker and integral noise results to all of the tests

Version 1.1.7 Aug 20 2009
- Fixed: Removed parabola fitting to find the center
- Fixed: Changed PW50 calculation to include only 3 data points (+/-1 around found value).
- Added: Marker and Integral Noise results to the FMRS and FMR Sweep tests
- Added: Peak Detect Overlay function
- Added: Threshold for peak area magnitude. Peaks with lower areas are discarded.
- Added: FMR Settings are now saved to the MDS setup file
- Added: Capacitance result for reference, if scaling option is enabled

Version 1.1.6 Aug 05 2009
- Fixed: Scaling option did not get saved

Version 1.1.5 Aug 05 2009
- Fixed: FMR Angle Sweep test did not display Frequency or Amplitude plots if two parameters were swept.
- Fixed: Adaptive parameters did not work in any of the tests
- Added: Scaling option for the FMR results
- Fixed: The colors on the FMR transfer curve test were not visible

Version 1.1.4 July 30 2009
- Added: icons to the tests

Version 1.1.0 July 23 2009
Initial Release

Version 1.0.5 June 9 2009
Internal Release
Fixed: in FMRA test all plots where shown instead of the last one

Version 1.0.4 Sep 30 2008
Internal Release
Added: FMR Field Angle Sweep Test

Version 1.0.2 Sep 10 2008
Internal Release
Fixed: Amplitude reported in uv, should be dB

Version 1.0.1 Sep 10 2008
Internal Release
Fixed: did not read the specturm analyzer type correctly from the ini file

Version 1.0.0
Initial Release